A couple of solutions were (1)to drill a hole below the lug mounting point thru the cam and with a s

Had the cruise control on my 01TL fail. Searched the site which lead me to the black plastic cruise control cam. The outer rim of the cam had failed allowing the lug at the end of the cruise control cable to disengage from the cam.
A couple of solutions were (1)to drill a hole below the lug mounting point thru the cam and with a small wire secure the lug to the cam. (2) Wrap wire around the ends of the lug and jam the lug back into the cam. (3) God forbid, replace julee cruise rockin back inside my heart the throttle body, as for some unknown reason the plastic cam is not sold as a separate item.
Anyway, as an alternate thought here, I repaired julee cruise rockin back inside my heart mine somewhat permanently using epoxy. Got some of that two part stuff in a tube, says it holds up to two tons. Mixed it up and let it set for a short time so that it gets tacky enough to be say a workable consistancy. In the mean time I put some super glue on the cam where the lug contacts it and secured the lug into place. Used the little spatula that comes with the epoxy kit to mold the epoxy around the lug and form a bond between the lug and the cam. Works OK.
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates julee cruise rockin back inside my heart shall bear any responsibility for Acurazine.com content, comments, or advertising. Acurazine.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Acurazine.com in any way. Copyright/trademark/sales mark infringements are not intended julee cruise rockin back inside my heart or implied.